Digital Monitoring Products XR150 Guide de l'utilisateur télécharger pdf (Page 7)

Introduction XR150FC/XR550FC User’s Guide 3

The Fire Command Center

Your system comes equipped with a built-in, easy-to-use Fire

Command Center that allows you to properly operate the system.

The Command Center is also available in a remote version. The

keyswitch to the left of the keyboard must be turned to the

“enable” position before you can use the four functions keys.

It is not necessary to use the keyswitch when using a user code

to perform operations. The illustration and descriptions below

highlight some features of the Fire Command Center:

Keyswitch

POWER

TROUBLE

ALARM

COMMAND

1234

5678

ABCDEF GHI JKL

MNOPQR STUVWX

ENABLE

SILENCE

RESET

TEST

DRILL

Fire Command Center

Select KeysLCD DisplayStatus LEDs

Function Keys

Data Entry Keys

Back Arrow Key

COMMAND Key

The Select keys

There are four keys under the display called the Select keys. They

allow you to choose what to do by pressing the Select key under

choices being shown in the display.

Data Entry keys

These keys allow you to enter your user code and other information

into the system.

The Back Arrow key

Use the Back Arrow key to go back through displays while operating

your system. Press the Back Arrow key to back up through the list

of User Menu functions or to make a correction by erasing the last

character you entered.

The COMMAND key

The COMMAND key allows you to advance through the displays or

User Menu or complete a data entry function.

Status LEDs

The Fire Command Center incorporates three LEDs to indicate the

system status. The three indicator lights are described below.

POWER LED

This LED remains ON steady when both AC and battery input are

good. The LED turns OFF when AC input is low. The LED ashes at

half-second intervals when battery input is low.

TROUBLE LED

This LED turns ON when any trouble displays in the status list, such

as AC, battery, phone line, transmit, ground fault, NAC, or any zone

trouble. This light is OFF when no trouble displays in the status list.

ALARM LED

The ALARM LED is ON when any alarm currently displays in the

status list. This LED is OFF when no alarm currently displays in the

status list.

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products XR150 Guide de l'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products XR150