Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur télécharger pdf (Page 25)

Arming and Disarming XT30/XT50 User Guide 21

is disarmed. When pressed, the Zone Monitor operation is initiated.

As needed, refer to the Zone Monitor section. The keypad displays

MONITOR ON and chimes or displays MONITOR OFF and no tone is

sounded.

Note: The Monitor (Chime) shortcut key applies to all Exit zones in

an Area system and to all zones assigned to the perimeter in

a Home/Sleep/Away or All/Perimeter system.

Check-in Report (Latch Key) Function

System Operation: Area, Home/Sleep/Away, or All/Perimeter.

Your system may be pre-programmed at installation to send

messages to your personal email, PDA, or cell phone. You can use

the Check-in Report (Latch Key), shortcut key 4, to have a Check-

in Report message sent. Refer to Appendix D for Email/Cell phone

message information.

Note: Check-in report function is not supported by Icon keypads.

Easy Exit™ Function

System Operation: Home/Sleep/Away.

You can use the Easy Exit, shortcut key 8, when the system is

armed, to restart the exit delay allowing you to exit the premises

without disarming the system. For example, to let a pet out or

retrieve the newspaper. After the exit delay time expires, the

system automatically rearms.

You can also press the Easy Exit, shortcut key 8 again, to cancel

the exit delay countdown. For example, the telephone rings before

you retrieve the newspaper so you press shortcut key 8 to rearm

the system.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 66 67

Pas de commentaire

Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur Page 25