Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur télécharger pdf (Page 22)

18 XT30/XT50 User Guide Arming and Disarming

Home/Away System Arming

Area Assignment: Your security system is divided into two or three

separate areas. Motion detectors, inside doors, and other interior

devices are assigned to an Interior and possibly Bedroom area while

windows and exterior doors, are assigned to a Perimeter area.

Arming the system: When arming a Home/Away system, the

keypad displays HOME AWAY or HOME SLEEP AWAY. If you select

AWAY, you arm all areas of the system. You want to arm all areas

when leaving with nobody staying inside.

Selecting HOME arms only the system Perimeter. Perimeter arming

is for when you are staying inside but want the comfort of knowing

the exterior doors and windows are armed.

Selecting SLEEP arms the Perimeter and Interior devices but leaves

devices near bedrooms and other nighttime areas off.

System Ready/System Not Ready Keypad Displays

When all system zones are in a normal condition and can be armed

without bypassing, the keypad displays SYSTEM READY. If there are

one or more zones that are not in a normal condition, the keypad

displays SYSTEM NOT READY. Pressing any Select key during this

display shows the faulted zone name.

Home/Sleep/Away Shortcut Key Arming

Arm Home — Press 3 for 2 seconds to arm the perimeter.

Arm Sleep — Press 7 for 2 seconds to arm the perimeter and interior

areas and leave the bedroom area off.

Arm Away — Press 1 for 2 seconds.

Arming a Home/Away System

1. Enter your user code. The keypad displays HOME AWAY or

HOME SLEEP AWAY (you may have three areas).

2. Select HOME to arm the Perimeter only.

3. Select SLEEP to arm the Perimeter and Interior.

4. Select AWAY to arm the Perimeter, Interior, and Bedroom.

5. The system displays any faulted and bypassed zones in the

following order: faulted burglary zones, bypassed burglary

zones, faulted 24-hour zones, and bypassed 24-hour zones.

6. At this point you can force arm or bypass any faulted burglary

zones. A zone that is force armed is restored into the system

if it later returns to normal. A zone that is bypassed remains

bypassed until the system is disarmed. See steps 6a through

6d.

6a. If a problem exists on any zones, the zone name and

problem display followed by: OKAY BYPASS STOP.

6b. Select OKAY to force arm the zone(s) before arming.

6c. Select BYPASS to bypass the zone(s) before arming.

6d. Select STOP to stop the system from arming. Correct the

zone problem(s) and return to step 1.

7. The keypad displays HOME SYSTEM ON if you selected HOME,

or SLEEP SYSTEM ON if you selected SLEEP, or ALL SYSTEM

ON if you selected AWAY.

8. The keypad next displays EXIT: ## INSTNT and begins to

count down the number of seconds remaining for you to exit.

The keypad sounds the exit delay alert and when the delay

expires, all zones are armed.

9. You can select INSTNT while EXIT: ## INSTNT displays to

immediately arm all zones and make them instant. The

keypad displays INSTANT. When you select INSTANT, any

entry/exit zone that trips immediately activates an alarm

and the exit delay countdown immediately stops.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 66 67

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products Graphic Touchscreen