Digital Monitoring Products 1912XR Guide d'installation télécharger pdf (Page 20)

Digital Monitoring Products, Inc.

1912XR Programming

Page 14

6.1 This function allows you to select the reports the 1912XR sends to the SCS-1

Receiver.

6.2 ABORT REPORT - YES allows the panel to send an alarm abort report to the

receiver any time an alarm report has also been sent and the bell is still

sounding. The area must be disarmed and no alarmed loops can still be armed.

Abort reports are also sent when the system is disarmed during Transmit Delay

and the Bell Output is active. See section 3.5.

6.3 BYPASS REPORTS - YES allows the panel to send all loop bypasses, resets,

and force arm reports to the receiver. The bypass report includes the loop

number, loop name, and the user number of the individual operating the system.

6.4 SCHEDULE CHANGE REPORTS - YES allows the panel to send all permanent

and temporary, primary and secondary, schedule changes to the receiver. The

report includes the day, opening time, closing time, and the user number of the

individual making the change.

6.5 CODE CHANGE REPORTS - YES allows the panel to send all code additions,

changes, and deletions to the receiver. The code change report includes the user

number added or deleted and the user number of the individual making the

change.

6.6 ACCESS KEYPADS - Enter the Security Command keypad addresses that send

door access reports to the receiver. A report is sent with each door access made

from the selected keypads. Keypads at addresses not selected still operate the

door strike relay but do not send door access reports. The report includes the

user number and the keypad address used.

6.7 AMBUSH - YES allows an ambush report to be sent anytime user code number

one is entered at a Security Command keypad. Selecting NO disables the

ambush report and allows user code number one to operate the same as all

other codes.

There is one Ambush code available for each active partition programmed into

the panel.

ABORT NO

SYSTEM REPORTS

CODE CHG YES

BYPASS YES

SCHD CHG YES

AMBUSH NO

ACS KEY: - - - - - - - -

6 -SYSTEM REPORTS

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 41 42

Pas de commentaire

Digital Monitoring Products 1912XR Guide d'installation Page 20