Digital Monitoring Products 1912XR Guide d'installation télécharger pdf (Page 38)

Digital Monitoring Products, Inc.

1912XR Programming

Page 32

STOP

14.1 At the STOP prompt, pressing any SELECT key allows you to exit the

Programmer function of the 1912XR panel. When selected, the panel performs

an internal reset and exits the programmer.

The STOP routine causes the following conditions to occur:

• All areas in all partitions are DISARMED

• All loops in all partitions are DISARMED

• The panel's Status List is CLEARED

During the reset, all keypad displays are momentarily blank for two seconds.

After the reset, the programming function is terminated and the keypads return to

the status list display.

14-STOP

1 2 ... 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Digital Monitoring Products 1912XR Guide d'installation Page 38