Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur télécharger pdf (Page 35)

28 XR150/XR350/XR550 User’s Guide User Menu

Using the Bypass Zones Function

1. Access the User Menu.

2. PressCOMMANDuntilBYPASSZONES?displays.

3. Press any Select key. The keypad displays

ZONE:-RSTBYPS.

4. ToBypassazone,enterthezonenumberandselectBYPS.

Thezonenumberautomaticallydisappearsandanewzone

number can be entered. Refer back to step 3.

5. ToResetazone,enterthezonenumberandselectRST.

Browser Feature

If you are unsure of the zone number or description, refer to

Appendix B at the back of this guide for a diagram showing you

how to use the built-in Bypass Zones browser.

Zone Monitor

Allows the system to monitor selected disarmed zones (doors,

windows, or motion detectors) and display their name at the

keypad as they are faulted. This feature could be used to monitor

an access door.

Zone Monitor works with any disarmed zone and also sounds the

keypadmonitortonewhenthezonefaults.Thezonenamedisplays

at all keypads designated for the area in your system.

YoucanplaceanycombinationofdisarmedzonesinZoneMonitor

butonlythemostrecentzonefaulteddisplays.Thedisplayedzone

nameclearsautomaticallyafterashorttimeorwhenthezoneis

armed.

Monitor (Chime) Shortcut Key

All Systems — Press 5 for 2 seconds when the system is disarmed.

Thisinitiates the Zone Monitor operation forall Exit zones in an

Area system or all zones assigned to the perimeter in a Home/

Sleep/Away, Home/Sleep/Away with Guest, or All/Perimeter

system.Thekeypad displays MONITORONandchimes or displays

MONITOROFFandnotoneissounded.

Testing your system’s burglary protection

After using the System Test function, place all zones in Zone

Monitor. Starting at the front door, go around and open and then

close each door and window. You should hear the keypad beep

eachtime.Thekeypadalsodisplaysthenameofeachzoneasits

device is opened.

Oncethe protected doors and windows test is complete, walkin

frontofeachmotiondetector.Thekeypadshouldbeeptoconrm

the zone has tripped. If at any time during your weekly testing

a device does not cause the keypad to beep, call the service

department for assistance.

Using the Zone Monitor Function

1. Access the User Menu.

2. PressCOMMANDuntilZONEMONITOR?displays.

3. Press any Select key. The keypad displays ALL NBR or

PERIM ALL NBR.

4. Select PERIM to place all disarmed perimeter zones into

Zone Monitor.

4a. The keypad displays ALL? ADD RMV.

4b. SelectADDtoaddalldisarmedzonestoZoneMonitor.

4c. SelectRMVtoremovealldisarmedzones.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products Graphic Touchscreen