Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur télécharger pdf (Page 43)

36 XR150/XR350/XR550 User’s Guide User Menu

9. At the PROFILE NO:  - display, enter a prole number

from 1 to 99, and press COMMAND. The displays shows

USER#ADDED.

Note:If BAT(Batch)was chosen in step 4 instead ofADD,

the next available user number is automatically selected

andonlysteps6and7repeat.TheUserProleassignment

is automatically selected for the next user based on the

previous user entered. This batch entry method speeds up

user entry in large systems.

Browser Feature

Refer to Appendix B at the back of this guide for a diagram showing

you how to use the Add User Codes browser.

Changing User Codes

Tochangeauser code,you musthaveausercodewithaprole

that has user code authority.

1. Access the User Menu.

2. PresstheCOMMANDkeyuntilUSERCODES?displays.

3. Press any Select key. The keypad displays ADD DEL CHG

B AT.

4. Select CHG to change a user code.

5. At the USER NUMBER: - option, enter the user number to

changeandpressCOMMAND.

Refer to the System Setup section for the number of user codes

available for your system.

6. The display changes to USER CODE: * * * * * *. Press any

Selectkeyandenterthenewusercode.PressCOMMAND.

7. The display then shows the current user name. Press any top

row key to clear. See Entering Names in Appendix C to enter

a new name.

Note: Changing a user code does not change the user number.

8. The display changes to PROFILE NO: -. Select the prole

numbertoassigna setofauthorizedfunctionsto theuser

codeasoutlinedintheUsersProleChart.

9. After entering the prole number, the keypad displays

USER# CHANGED for ve seconds followed by USER

NUMBER: -. This display allows you to enter another user

number to change. Press the Back Arrow key twice to exit

the User Menu.

Changing Own User Code

Your system may be programmed at installation to allow users to

change their own user code.

1. Access the User Menu.

2. Press the COMMAND key until USER CODES? displays. Press

any Select key.

3. The display changes to USER CODE: * * * * * *. Press any

Select key.

4. Type your new user code. Press Command.

Browser Feature

Refer to Appendix B for diagrams showing you how to use the

Change User Codes browser.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products Graphic Touchscreen