Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur télécharger pdf (Page 70)

Appendix E XR550/XR350/XR150 User’s Guide 63

DMP Wireless Description

IfyoursystemusesDMPWirelessdevicesandincludeskeyfob(s),

refer to the following information. The DMP Wireless section

includesabriefdiscussionofkeyfob(s)andadrawingidentifying

the key fob buttons. Refer to the System Setup section of this guide

tocheckthebuttonprogramminglistforkeyfob(s)connectedto

your system.

For best operation, allow the LED to light and turn off before

pressing another button. The key fob may not complete sending

the signal for the button press if another button is pressed too

soon.

Appendix E

LED Status Operation

Depending on the programmed action of a key fob button, the

Status LED lights to acknowledge a button press or to indicate the

armed state of the system.

• When the button is programmed for Panic, Panic 2,

Emergency,Emergency2,Output,orSensorReset,a1/2

second Green light displays to acknowledge the button

press.

• WhenthebuttonisprogrammedforArm,Disarm,Toggle

arm/disarm, or Status, the system armed status is

received by the key fob and the LED lights once as shown

in the table below.

LED Color Duration Description

Red 2.0 Seconds AllSystemOn

Green 2.0 Seconds AllSystemOff

Green/Red 2.0 Seconds

SystemOn

(SomeAreasArmed)

When a button programmed as Unused is pressed, the LED does not

operate.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 83 84

Pas de commentaire

Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur Page 70