Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur télécharger pdf (Page 13)

6 XR150/XR350/XR550 User’s Guide Introduction

7/0

Panic Function

Thinline™ and Aqualite™ Keypads:

Thinline™ and Aqualite™ Keypads may also be programmed at

installation to allow the user to initiate an optional Panic alarm by

simultaneouslypressingandholdingthe7and0(zero)keys.When

the 7 and 0 keys are pressed for a short time, the keypad sends a

Panic alarm report to the central station.

Note: The 7/0 Panic Function is not available on Clear Touch™,

Thinline™ Icon, Wireless, or Graphic Touchscreen keypads.

Common Keys on All Keypads

Data Entry Digit keys

These keys allow you to enter your user code when arming or

disarming or enter other information into the system.

COMMAND (CMD) key

The COMMAND key allows you to advance through the keypad

displays, User Menu, or complete a data entry function.

Back Arrow

(<—) key

The BackArrow (<—) key is used to go back through the keypad

displays while operating your system. You can press the Back Arrow

key to back up through the list of functions in the User Menu or to

erase the last character you entered.

Using the Keypad

Multi-lingual Display Option

Your system may be programmed to display the User Menu and

Status Display text in multiple languages. When the COMMAND

key is pressed, the option to choose the language displays. Select

the language you want to use. The language chosen continues to

display at this keypad until another language is chosen.

Keypad Displays Current Programming

Most User Menu options displayed at the keypad show the currently

selected option in the panel memory. These options are either

shown as a number, a blank, or a NO or YES. To change a number

press any top row Select key. The current option is replaced with a

dash.Pressthenumber(s)onthekeypadyouwanttoenterasthe

new number for that option.

Itisnotnecessarytoenternumberswithleadingzeros.Thepanel

automaticallyrightjustieswhenyoupresstheCOMMANDkey.To

change an option that requires a NO or YES response, press the top

row Select key for the response not selected. For example, if the

current option is YES and you want to change it to NO, press the

third Select key. The display changes to NO.PresstheCOMMAND

key to go to the next option.

Multiple Displays (XR350 and XR550 System Only)

For some User Menu options, such as Access Areas under User

Proles there are several displays containing lists. For example,

when using Access Areas, areas 1 through 32 display on four

separate displays. First, areas 1 through 8 display. Press the

COMMANDkeytodisplayareas9through16.PresstheCOMMAND

keyagaintodisplayareas17through25.PresstheCOMMANDkey

onemoretimetodisplayareas26through32.

Note:Onlyareaspre-programmedatinstallationcanbeviewed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products Graphic Touchscreen Guide de l'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products Graphic Touchscreen