Digital Monitoring Products XR20 Guide d'installation télécharger pdf (Page 17)

XRSuper6/XR20/XR40 Programming Guide

2500 N. Partnership Boulevard Springfield, MO 65803 www.dmpnet.com Digital Monitoring Products

4.7 SERVICE RECEIVER AUTHORIZATION

YES enables remote commands and programming to be accepted from a secondary

service receiver other than the alarm SCS-1 Receiver. The Remote Key option can

also be required.

With YES selected, the panel requests the service receiver key the first time it is

contacted by the service receiver. The panel retains this service receiver key in

memory and accepts remote commands from the service receiver.

If an alarm occurs during a remote connect, the panel disconnects from the service

receiver and calls the alarm receiver. Alarm reports are only sent to the alarm

receiver. It is important that the alarm receiver key and the service receiver key

programmed at the central station are NOT the same so the panel can determine the

difference between receivers.

When NO is selected, remote commands and programming are not accepted from a

secondary service receiver.

4.8 REMOTE DISARM

Enter YES to enable the panel to be disarmed remotely. Selecting NO disables

remote disarming.

SVC RCVR YES

REMOTE OPTIONS

DISARM NO

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Pas de commentaire

Digital Monitoring Products XR20 Guide d'installation Page 17