Digital Monitoring Products Canadian XR100 Manuel d'instructions télécharger pdf (Page 11)

XR100 Series Programming Guide Digital Monitoring Products

IntroductIon

1.7 Keypads

DMP offers multiple keypads in a variety of styles. All DMP keypads provide the same programming

capabilities.Eachkeypadanditsoperationareshownanddescribedinthefollowingsections.

1.8 Special Keys

Thefollowingspecialkeys/areasarecommontoallDMPkeypads.

COMMAND (CMD) Key

Pressing the COMMAND key allows you to go forward through the programming menu and through each

step of a programming sec tion. As you go through the programming, the keypad display shows any current

programming already stored in the panel memory. If no change is required for an option, press the

COMMAND key to advance to the next step.

TheCOMMANDkeyisalsousedtoenterinformationintothepanel’smemorysuchasphonenumbersor

zone names. Press the COMMAND key after entering information.

Back Arrow (<—) Key

UsetheBackArrowkeytobackuponestepwhileprogramming.TheBackArrowkeyisalsousedwhenan

error is made while entering in formation. Press the Back Arrow key once to erase the last character entered.

Select Keys/Areas

The top row of keys are called the Select keys on Wireless, Thinline, and Aqualite keypads or Select Areas

onClearTouchandGraphicTouchscreenkeypads.EachtimeyouneedtopressaSelectkey,thekeypad

displays the function or options above one of the keys or in the Select Area. Displaying choices above

individual Select keys or in Select Areas allows them to be used for many different applications. For

example, you can enter AM or PM when programming the automatic test time or answer YES or NO for a

system option.

Duringprogramming,theSelectkeys/areasalsoallowyoutochangeinformationcurrentlyinpanelmemory

bypressingtheappropriateSelectkey/areaunderoronthedisplay.Youthenenterthenewinformation

using the keypad data entry digit keys.

When there are more than four re sponse options avail able, press the COMMAND key to display the next one

to four options. Pressing the Back Arrow key allows you to review the previous four choices.

TheSelectkeys/areasarealsousedforchoosingasectionfromtheprogrammingmenu.PressanySelect

key or touch the Select Area when the programming section name you want displays.

Note: On Wireless, Thinline and Aqualite keypads,wheninstructedtopresstherstSelectkey,pressthe

far left Select key; the second Select key is the second from the left; third Select key is second from the

right;andthefourthSelectkeyisthefarrightkey.SeeFigure7.

On Clear Touch and Graphic Touchscreen Keypads,wheninstructedtopresstherstSelectkey,touch

SelectArea1;thesecondSelectkeytouchSelectArea2;thirdSelectkeytouchSelectArea3;andthe

fourthSelectkeytouchSelectArea4.SeeFigure8.

Figure 3: Wireless Keypad

32-Character Display

Data Entry Digit keys

COMMAND Key

Back Arrow Key

Select Keys

Backlit Logo

and Proximity

Antenna

SMITH RESIDENCE

FRI 12: 51 PM

Figure 4: Thinline/Aqualite Keypad

32-Character Display

Armed LED

Power LED

Data Entry Digit keys

COMMAND Key

Back Arrow Key

Select Keys

JONES RESIDENCE

FRI 12:51 PM

Backlit Logo

and Proximity

Antenna

AC Power/Armed LED

Three Panic Icons

32-Character

Display with

Four Touch

Select Areas

Data Entry

Digit Keys

COMMAND KeyBack Arrow Key

Logo

Icon

ABC PRINTING

FRI 2:51 AM

Figure 5: Clear Touch Keypad

Dealer Logo

Proximity Reader

Carousel

Interactive Shield

Current and Future

Weather Conditions

Figure 6: Graphic Touchscreen Keypad

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 77 78

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products Canadian XR100 Manuel d'instructions Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products Canadian XR100