Digital Monitoring Products Canadian XR100 Manuel d'instructions télécharger pdf (Page 43)

XR100 Series Programming Guide Digital Monitoring Products

Output OptiOns

11.15

CLS WAIT OUT: 0

Closing Wait Output

Entertheoutputnumbertoturnonforapproximatelyfour(4)secondswhen

ClosingWaitisprogrammedasYESandthepanelsuccessfullycommunicates

the closing message at arming. If the closing message does not communicate

successfully, this output does not turn on.

11.16

ARM-ALARM OUT: 0

Arm-Alarm Output

Entertheoutputnumbertoturnonsteadywhenanyareaofthesystemis

armed. If an alarm occurs causing the keypads to turn Red, this output pulses and

continuestopulseforapproximatelyve(5)minutesafterthepanelisdisarmed.

Enter0(zero)todisable.

Wireless Outputs

•TheArm-AlarmOutputiscompatiblewiththeModel1117WirelessLED

AnnunciatorandtheModel1116WirelessRelayOutputconnectedtoaModel

572IndicatorLED.

•WhentheModel1117isbatteryoperated,theLEDisoffwhenthesystemis

armedtoconservebatterylife.Ifanalarmoccurs,theoutputashesquickly.

•WhenusingtheModel1116connectedtoaModel572,theLEDisonwhenthe

system is armed. If an alarm occurs, the output pulses.

•TooperatetheArm-Alarmoutputwithinonesecond,programafastresponse

numberfrom480to499.Fastresponseoperationreducesoverallwireless

output battery life.

•TooperatetheArm-Alarmoutputwithin15seconds,programaslowresponse

numberfrom450to474.Slowresponseoperationincreasesoverallwireless

output battery life.

11.17

SUPV ALM OUT: 0

Supervisory Alarm Output

Entertheoutputnumbertoturnonwhenasupervisoryzonetypeisplacedintoan

alarm. The output turns off when all supervisory type zones are restored to normal.

Enter0(zero)todisable.Defaultis0.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 77 78

Pas de commentaire

Digital Monitoring Products Canadian XR100 Manuel d'instructions Page 43