Digital Monitoring Products XR20 Guide d'installation télécharger pdf (Page 38)

Digital Monitoring Products XRSuper6/XR20/XR40 Programming Guide

zone informaTion

11.10.3

SUPRVSN TIME: 0

Key Fob Supervision Time

Press any top row key to select the supervision time required for the key fob zone.

Press COMMAND to accept the default time. Default is 0.

0 3 60 240

Press the Select key under the required number of minutes. The key fob must check

in at least once during this time or a missing condition is indicated for that zone.

1100 Series key fobs automatically checkin based on the supervision time selected

for the wireless zone, no additional programming is needed. Zero (0) indicates an

unsupervised transmitter.

Note: When the panel is reset or a receiver is installed or powered down and

powered up, the supervision timer restarts for all wireless zones.

11.10.4

BUTTONS: 4

Number of Key Fob Buttons

Enter the number of buttons (1, 2, or 4) on the key fob being programmed. Default

is four buttons.

Note: If the key fob is a one-button model, programming continues at the Button

Action section. Default button assignment for one-button key fobs is a Panic Alarm

(PN) with no output assigned.

11.10.5

TOP BTM LFT RGT

Key Fob Button Selection (Four Buttons)

This prompt only displays if the key fob being programmed is a four-button model.

Press the Select key under the key fob button to program. The following list

identies the default button assignments:

TOP Arming with areas 1, 2, and 3 assigned

BTM Disarming with areas 1, 2, and 3 assigned

LFT Panic Alarm (PN) with no output assigned

RGT Arming with Area 1 assigned

11.10.6

TOP BTM

Key Fob Button Selection (Two Buttons)

This prompt only displays if the key fob being programmed is a two-button model.

Press the Select key under the key fob button to program. The following list

identies the default button assignments:

TOP Arming with areas 1, 2, and 3 assigned

BTM Disarming with areas 1, 2, and 3 assigned

11.10.7

ACTION: XXXXXXX

Button Action

This option species the Button Action for an individual key fob button. The default

action for the button selected is displayed. Press any Select key to display the

Button Action options. To view more options press the COMMAND key.

ARM DIS TGL STA

ARM (Arm) - Arms selected areas and force arms bad zones.

DIS (Disarm) - Disarms selected areas.

TGL (Toggle Arm) - Toggles arm/disarm for selected areas and force arms bad zones

when arming.

STA (Status) - Causes the key fob LED to indicate the arm/disarm status of the

system.

PN PN2 EM EM2

PN (Panic) - Triggers a Panic zone type alarm with no restoral.

PN2 (Panic 2) - Triggers a Panic zone type alarm with no restoral when pressed

simultaneously with any other Panic 2 button. No action occurs when pressed

alone.

EM (Emerg) - Triggers an Emergency zone type alarm with no restoral.

EM2 (Emerg 2) - Triggers an Emergency zone type alarm with no restoral when

pressed simultaneously with any other Emergency 2 button. No action occurs when

pressed alone.

OUT RST UN

OUT (Output) - Causes an output to turn on steady, pulse, momentary, toggle or off.

RST (Sensor Reset) - Causes the panel to perform a standard Sensor Reset.

UN (Unused) - The button is not used and performs no action.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products XR20 Guide d'installation Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products XR20