Digital Monitoring Products XR20 Guide d'installation télécharger pdf (Page 42)

Digital Monitoring Products XRSuper6/XR20/XR40 Programming Guide

zone informaTion

11.16

CRS ZONE NO YES

Cross Zone

Select YES to enable cross-zoning for this zone. Cross-zoning requires this zone to

trip twice, or this zone and another cross-zoned zone to trip, within a programmed

time before an alarm report is sent to the receiver.

Note: To operate correctly, all cross-zone zones need to be programmed as the

same zone type.

When a cross-zoned zone trips, the Output action assigned to the zone activates. See

the Bell Action section. The cross-zone time specied in System Options begins to

count down. See the Cross-Zone Time section. If another cross-zoned zone in the

system faults, or if the rst zone restores and faults again before the cross-zone time

expires, the bell turns on and the panel sends an alarm report.

If no other cross-zoned zone in the system trips before the cross-zone time expires,

the panel sends only a fault report from the rst zone to the receiver.

Note: If CRS ZONE is YES, a valid CRS ZN TIME must be programmed for this feature

to be enabled.

Cross-zoning is not compatible with Fire Verify zone types: You cannot enable

cross-zoning for Fire Verify zones.

Note: For lsited installations, Cross Zoned zones must protect the same area.

11.17

PRIORITY NO YES

Priority

Selecting YES allows you to provide additional protection for a zone by requiring it

to be in a normal condition before its assigned area can be armed. A priority zone

cannot be bypassed.

A Priority zone not in a normal condition cannot be armed. If a user attempts to

arm the area, the keypad displays the bad zone name followed by PRIORITY ZONE

and the arming is stopped.

11.18

ZONE NO: -

Zone Number

Enter the zone number you want to program next. Return to section 9.1 and follow

the descriptions of each programming prompt. If all zones are programmed, press

the ARROW key at the ZONE NO: – display to continue.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 51 52

Pas de commentaire

Digital Monitoring Products XR20 Guide d'installation Page 42