Digital Monitoring Products XR20 Guide d'installation télécharger pdf (Page 48)

Digital Monitoring Products XRSuper6/XR20/XR40 Programming Guide

aPPendiX

The third column from the left is the second digit of the 2-digit event code sent to the receiver. The

fourth column (on the right) is what that character represents. See below:

1st

Digit

1st Digit

Description

2nd Digit 2nd Digit Description

1 Fire Alarm 1 to A, B, D Zones 1 to 10 (1 to A), Keypad Fire Buttons (B), and Zones greater than 10 (D)

4-2 Communication Reports

The table below is a complete list of the hexadecimal characters sent using the DMP 4-2 communication

format.

1st

Digit

1st Digit Description 2nd Digit 2nd Digit Description

1 Fire Alarm 1 to A, B, D Zones 1 to 10, Keypad Fire Buttons, and Zones greater than 10

2 Panic Alarm 1 to A, B, D Zones 1 to 10, Ambush, and Zones greater than 10

3 Burglary Alarm 1 to A, B, D Zones 1 to 10, Keypad Police Buttons, and Zones greater than 10

4 Emergency Alarm 1 to A, B, D Zones 1 to 10, Keypad Emergency Buttons, and Zones greater

than 10

5 Supervisory Alarm 1 to A, D Zones 1 to 10, and Zones greater than 10

6 Aux 1, Aux 2, or Blank Type Alarms 1 to A, D Zones 1 to 10, and Zones greater than 10

7 System Report 1 Automatic Recall

7 System Report 2 Non-AlarmOverow

7 System Report 3 ZoneAlarmOverow

7 System Report 4 System Test

7 System Report 5 Unsuccessful Remote Connect

7 System Report 6 System Recently Armed

7 System Report 7 Exit Error

7 System Report 8 Remote Programming Complete

7 System Report 9 Local Programming

7 System Report A Transmit Fail

7 System Report B System Not Armed by Scheduled Time

7 System Report E Bell Circuit Trouble

7 System Report F Bell Circuit Restored

8 User Code Addition 1 to C, D, F Users 1 to 12, 0, and Users greater than 12

8 User Code Deletion 1 to C, D, F Users 1 to 12, 0, and Users greater than 12

8 User Code Change 1 to C, D, F Users 1 to 12, 0, and Users greater than 12

A Zone Bypass or Force Arm 1 to A, D Zones 1 to 10, and Zones greater than 10

B Disarming 1 to C, D, F Users 1 to 12, 0, and Users greater than 12

C Arming 1 to C, D, F Users 1 to 12, 0, and Users greater than 12

D Abort Received 1 None

E Any Zone Restoral, Reset, or System

Restoral

1 to A, B, C, D Zones 1 to 10, Battery, AC, and Zones greater than 10

F Zone Trouble, Fault, Transmitter Low

Battery or Missing, or System Trouble

1 to A, B, C, D Zones 1 to 10, Battery, AC, and Zones greater than 10

4-2 Examples

The following examples are the actual event codes a central station would receive. The full report would

also include the account number and checksum.

When the central station receives this event code It means

1A A Fire alarm is being reported on zone ten

2B An Ambush alarm is being reported

FB A battery trouble is being reported

F9 A Trouble is being reported on zone nine

1st digit of event code

sent to the receiver

Describes the event 2nd digit of event code

sent to the receiver

Denestheusernumber,zonenumber,orother

information about the event

1 2 ... 43 44 45 46 47 48 49 50 51 52

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products XR20 Guide d'installation Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products XR20