Digital Monitoring Products XR550 Guide de l'utilisateur télécharger pdf (Page 36)

32 XR150/XR350/XR550 User Guide User Menu

REMOVE Devices from FAVORITES

1. Access the User Menu.

2. Press COMMANDuntilZWAVESETUP?displays.

3. PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.

4. Press COMMANDagaintodisplayFAVXFERREDISC.Select

FAVandFAVORITENUMBER:-isdisplayed.

5. Enter a Favorite number between 1 and 20, press COMMAND.

6. The Favorite number and name displays. Press COMMAND

and the FavoriteNameandADDEDITREMOVEdisplays.

7. Select REMOVE and the rst Z-Wave device stored in the

Favorite displays.

Remaining devices can be viewed by

pressing the COMMANDkey.

8. Press any Select key to remove the device from the Favorite.

REMOVE DEVICE FROM FAV? NO YES displays. When YES is

selected, the device is removed from the Favorite.

Transfer Controller (XFER)

This option allows the transfer of all existing Z-Wavedevicesthat

are currently programmed in another manufacturer’s Z-Wave

portable controller to your system.

This operation will overwrite all Z-Wavedevicesthat are

programmed in your system. This option typically occurs at

thetimeyourDMPZ-Wavecontrollerisinstalled.

Initiatethetransferattheothermanufacturer’sZ-Waveportable

controllerafterstartingthetransferontheDMPkeypad.Z-Wave

devicesareNOToverwrittenuntilthetransferhasbeeninitiated

at the other manufacturer’s Z-Wave portable controller. The

transfer should not be stopped once the process has been initiated

from the other manufacturer’s Z-Waveportablecontroller.

Transfer Operation:

1. Access the User Menu.

2. Press COMMANDuntilZWAVESETUP?displays.

3. Press any Select key. The keypad displays

ADDLISTREMOVE.

4. Press COMMANDagaintodisplayFAVXFERREDISC.Select

XFER. The keypad displays XFER WILL DELETE EXISTING

DEVICESthendisplaysXFERCNTRLSURE?YESNO.

5. Select YES to to allow receipt of Z-Wave devices to your

system. The keypad  displays TRANSFERRING Z-WAVE

DEVICES. Pressing the Back Arrow key cancels the transfer.

Select NO to exit the XFER menu and return to ZWAVE

SETUP?. All programming will still be intact on the DMP

Z-Wavecontrollerandwillcancelthetransfer.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products XR550 Guide de l'utilisateur Page 36

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products XR550