Digital Monitoring Products XR550 Guide de l'utilisateur télécharger pdf (Page 75)

Appendix E XR550/XR350/XR150 User Guide 71

Appendix E

DMP Wireless Description

IfyoursystemusesDMPWirelessdevicesandincludeskeyfob(s),

refer to the following information. The DMP Wireless section

includesabriefdiscussionofkeyfob(s)andadrawingidentifying

the key fob buttons. Refer to the System Setup section of this guide

tocheckthebuttonprogramminglistforkeyfob(s)connectedto

your system.

For best operation, allow the LED to light and turn off before

pressing another button. The key fob may not complete sending

the signal for the button press if another button is pressed too

soon.

LED Status Operation

Depending on the programmed action of a key fob button, the

Status LED lights to acknowledge a button press or to indicate the

armed state of the system.

• When the button is programmed for Panic, Panic 2,

Emergency, Emergency 2, Output, or Sensor Reset, a 1/2

second Green light displays to acknowledge the button press.

• When the button is programmed for Arm, Disarm, Toggle

arm/disarm, or Status, the system armed status is received

by the key fob and the LED lights once as shown in the table

below.

LED Color Duration Description

Red 2.0 Seconds AllSystemOn

Green 2.0 Seconds AllSystemOff

Green/Red 2.0 Seconds

SystemOn

(SomeAreasArmed)

When a button programmed as Unused is pressed, the LED does not

operate.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 87 88

Pas de commentaire

Digital Monitoring Products XR550 Guide de l'utilisateur Page 75