Digital Monitoring Products XR550 Guide de l'utilisateur télécharger pdf (Page 38)

34 XR150/XR350/XR550 User Guide User Menu

Browser Feature

If you are unsure of the zone number or description, refer to

Appendix B at the back of this guide for a diagram showing you

howtousethebuilt-inZoneStatusbrowser.

Bypass Zones

Allowsyoutobypassazonepriortoarming.

Bypassing is usually done when a zone cannot be restored to

normal.Asignicantbenetofbypassingazoneistoallowazone

in a faulted or bad condition to be bypassed so arming can occur.

Thefaultedzonecanbeservicedthenextday.

A zone can be bypassed only while it is disarmed. Fire, panic,

emergency,andsupervisorytypezonesarealwaysarmed,sothey

can never be manually bypassed.

Bypass Zones can also be used to reset a zone that has been

bypassed and restore it back into the system.

When Bypass Zones is selected, a report can be transmitted to

your central station.

During arming, when choosing to bypass a zone or device, there

may be a pre-programmed maximum number of zones (up to

8) that can bebypassed in an area. This limitis programmed at

installation.

Using the Bypass Zones Function

1. Access the User Menu.

2. Press COMMANDuntilBYPASSZONES?displays.

3. PressanySelectkey.ThekeypaddisplaysZONE:-RSTBYPS.

4. ToBypassazone,enterthezonenumberandselectBYPS.

Thezonenumberautomaticallydisappearsandanewzone

number can be entered. Refer back to step 3.

5. ToResetazone,enterthezonenumberandselectRST.

Browser Feature

If you are unsure of the zone number or description, refer to

Appendix B at the back of this guide for a diagram showing you

howtousethebuilt-inBypassZonesbrowser.

Zone Monitor

Allows the system to monitor selected disarmed zones (doors,

windows, or motion detectors) and display their name at the

keypad as they are faulted. This feature could be used to monitor

an access door.

Zone Monitor works with any disarmed zone and also sounds the

keypadmonitortonewhenthezonefaults.Thezonenamedisplays

at all keypads designated for the area in your system.

YoucanplaceanycombinationofdisarmedzonesinZoneMonitor

butonlythemostrecentzonefaulteddisplays.Thedisplayedzone

nameclearsautomaticallyafterashorttimeorwhenthezoneis

armed.

Monitor (Chime) Shortcut Key

All Systems — Press 5 for 2 seconds when the system is disarmed.

Thisinitiates the Zone Monitor operation for all Exit zones in an

Area system or all zones assigned to the perimeter in a Home/

Sleep/Away, Home/Sleep/Away with Guest, or All/Perimeter

system.Thekeypad displaysMONITOR ONand chimesordisplays

MONITOROFFandnotoneissounded.

Testing your system’s burglary protection

After using the System Test function, place all zones in Zone

Monitor. Starting at the front door, go around and open and then

close each door and window. You should hear the keypad beep

eachtime.Thekeypadalsodisplaysthenameofeachzoneasits

device is opened.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products XR550 Guide de l'utilisateur Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products XR550