Digital Monitoring Products XR550 Guide de l'utilisateur télécharger pdf (Page 41)

XR150/XR350/XR550 User Guide 37User Menu

Note:YoursystemmaybeprogrammedtolimitthePanicZoneTest

to only be performed during the Area 32 schedule.

User Proles

Add,delete,orchangeUserProles,thatdenetheauthorityof

each user code in the system. Several characteristics dene the

authorityofeachUserProlewithinthesystem.Alwaysmakesure

thatatleastoneadministratorinyoursystemhasaprolewithall

authorities and all areas.Uptofourprolesmaybeassignedper

user.

InAll/PerimeterorHome/Sleep/Awayoperation,UserProleswill

not display in the User Menu. When adding User Codes, use the

defaultproles1through10.RefertotheUserProlesChart.

InHome/Sleep/AwaywithGuestoperation,theUserProlesoption

does not display in the User Menu but when adding User Codes, enter

a prole number 1 through 9forthe main house system, proles

11-19 for the Guest 1 house system, and proles 21-29 for the

Guest2housesystem(XR550only).Proles2-9willdefaulttohave

Arming/Disarmingforalleightareas,whileproles12-19and22-29

only have Arm/Disarm assigned to Guest 1 and Guest 2 respectively.

Proles1,11,and21donothaveanyArming/Disarmingauthority

assigned.RefertotheUserProlesChart.

Prole Number-Eachprolemaybeassignedauniquenumber

from1to99.

Prole Name-Eachprolemaybeassigneda32-charactername.

TheProleNumberisthedefaultname.

Area Number - Each prole may be assigned specic areas of

the system for arming and disarming. When proles 1 to 98 are

created,NOareasareassignedbydefault.Thedefaultforprole

99isALLareasassigned.Prole99ispredenedinthesystemby

the factory. For the XR150 Series system you can assign areas 1 to

8.FortheXR350Seriespanelyoucanassignareas1to16andinan

XR550 Series system you can assign areas 1 to 32.

Access Area Number - Each prole may be assigned door access area

assignments.Defaultforprole1to98isNOareasassigned.Defaultfor

prole99isALLareasassigned.Prole99ispredenedatthefactory.

Output Group Assignment - Each prole may be assigned an

outputgroupnumberfrom1 to 10. Default for prole 1 to 98 is

NO output group assigned. Default for prole 99 is output group

10. Your system may by programmed to turn on an output group at

certain keypads when door access occurs.

User Menu Assignments-Each user prole may have anyofthe

menusassignedtoitasshownintheUserProleRecord.TheUser

Prole Record lists the user menu prole assignments and the

systemfunctionsusersareallowedtoaccessbasedontheprole

numbers assigned to their codes.

Adding User Profiles

1. Access the User Menu. Press COMMANDtoUSERPROFILES?.

2. Press any Select key. The keypad displays ADD DEL CHG.

SelectADDtoaddanewuserprole.

AtthePROFILENO:-option,enteranunusedprolenumber

and press COMMAND.ThedisplaychangestoPROFILENAME.

4. Press any Select key. Enter a prole name of up to 32

characters. Press COMMAND.SeeAppendixB.

5. At the ARM/DIS AREAS: option, select the area numbers for

arminganddisarmingassignedtothisprole.

6. The keypad displays ACCESS AREAS: . Select the area

numbers assignment to allow door access for this prole.

Press the COMMANDkey.

ThekeypaddisplaysOUTPUTGROUP:-.Enterthenumberforthe

OutputGroupassignedtothisprole.PresstheCOMMANDkey.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products XR550 Guide de l'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products XR550