Digital Monitoring Products XR550 Guide de l'utilisateur télécharger pdf (Page 48)

44 XR150/XR350/XR550 User Guide User Menu

Deleting User Codes

1. Access the User Menu.

2. Press COMMANDuntilUSERCODES?displays.

3. Press any Select key. The keypad displays ADD DEL CHG

B AT.

4. Select DEL to delete a user code from the system. To delete

ausercode, youmusthave ausercodewithaprolethat

has user code authority.

Note: Your system must have at least one user with user code

authority in order to be able to add or delete user codes. Be careful

not to delete all users with user code authority from your system.

Also, the user code used to enter the user menu to delete codes

cannot be deleted. In other words, you can not delete yourself.

5. At the USER NUMBER: - option, enter the user number you

want to delete and press COMMAND.Thedisplaychangesto

USER#DELETED.

6. ThedisplaythenchangesbacktoUSERNUMBER: -allowing

you to delete another user. Press the Back Arrow key twice

to exit the User Menu.

Browser Feature

Refer to Appendix B at the back of this guide for a diagram showing

you how to use the Delete User Codes browser.

Sending User codes to Z-Wave locks

Your system may be pre-programmed at installation to support Z-

Wave door locks. This option allows you to send user codes of user

numbers 2-20 to all compatible Z-Wave locks. Once codes have

been received by the lock, a valid user code entered at the lock

(byusernumber2-20)willlockthedoororunlockanddisarmthe

system according to the user’s privileges.

1. Access the User Menu.

2. Press the COMMANDkeyuntilUSERCODES?displays.

3. Press any Select key. The keypad displays ADD DEL CHG

BAT. Press COMMANDagaintodisplayFRGVSEND.

4 . Select SEND to send user codes of user numbers 2-20 to

all compatible Z-Wave locks on your system. The keypad

displays the progress of user codes being sent. The process

may take several minutes.

5. If all locks receive the user codes, the display will return to

the Status List.

6. If a lock does not receive the user codes, the keypad

displaysCODESNOTSENTTOALLLOCKS.

Forgive Failure to Exit

Failure to Exit is an Anti-passback violation in which a user assigned

with anti-passback has attempted to re-enter an area that they did

not exit through.

Forgive Failure to Exit removes the anti-passback violation. See

FailedtoExit(Anti-Passback)formoreinformation.

1. AftertheUSERCODES?menuisaccessedandADDDELCHG

BAT displays. Press COMMANDagaintodisplayFRGVSEND.

2. Select FRGV to forgive the Failure to Exit and press

COMMAND.

3. At the USER NUMBER:- option, enter the user number to

be forgiven and press COMMAND. The User Code Browser

describedinAppendixBcanhelpndtheappropriateuser

by name if you do not know the number.

4. The keypad displays USER XXXX FORGVN to conrm, then

returns to step 3 for the next user. Press the Back Arrow

key to exit this menu.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products XR550 Guide de l'utilisateur Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products XR550