Digital Monitoring Products XR550 Manuel d'instructions télécharger pdf (Page 38)

Digital Monitoring Products XR150/XR350/XR550 Series Programming Guide

SYSTEM OPTIONS

9.25 Use False Alarm Question

This option allows users to investigate a burglary alarm prior to disarming the system and

send an Alarm Veried or Alarm Cancelled message to the Central Station.

Select YES to display IS THIS A FALSE ALARM? NO YES when a burglar alarm occurs.

Select NO to display CANCEL VERIFY. Default is YES.

When a burglar alarm occurs in an area system and a user code is entered at a keypad

Status List, keypads programmed as KPD in Device Setup display IS THIS A FALSE ALARM?

NO YES or CANCEL VERIFY. The option is not displayed at devices programmed as DOOR.

Selecting NO or Verify sends an alarm message to the Central Station. Selecting YES or

CANCEL sends an alarm cancelled message to the Central Station and disarms the areas

that the user has the authority to disarm. This display remains on the keypad until a

selection is made, the Back Arrow is pressed, or the internal system bell cutoff timer

expires.

9.26 Allow Own User Code Change

This option allows users without user code authority to change their own user code. When

YES is selected,the User Code menu displays USER CODE: ***** at the keypad to allow that

user to change their own code. If NO is selected, the user cannot change their personal

user code. Default is NO.

9.27 Panic Supervision

Select YES to enable a 30 day supervision of the Model 1145-1-B-PSV key fob.

Default is NO.

This option allows a key fob that is lost or has a dead battery to be identied at the

Central Station host automation system as a missing transmitter, without the need to apply

a supervision time in zone information programming. SCS-VR Version 1.3.6 or higher is

required to receive 1145-1-B-PSV supervision messages through the XR550 panel.

The 1145-1-B-PSV key fob supervision message is communicated to SCS-VR using all

XR550 communication paths where Panic Test is YES within Advanced Communication

programming. A supervision message is automatically sent from the key fob to SVS-VR every

four hours, resetting the 30 day countdown timer for that key fob serial number. If the 30

day timer expires for a key fob serial number, SCS-VR will generate a zone missing message

to the host automation system. For the application where the key fob is programmed

into several XR550 Version 210 or higher panels, a supervision message sent through any

XR550 into which the key fob is programmed will satisfy the 30 day timer. The SCS-VR zone

missing message to host automation will be for the last panel account number where the

key fob successfully communicated a supervision message to SCS-VR. The key fob MISSING is

not displayed or recorded at the XR550 control panel.

In addition, this option allows for manual testing of 1145-1-B-PSV key fobs during Walk

Test (8144) or Panic Test from the User Menu. A key fob that is successfully activated

during these test modes will cause an increment to the keypad display TRIPS counter and

a Verify message is sent to SCS-VR for that zone. For those 1145-1-B-PSV key fobs that are

programmed into the panel but not manually tested, a Fail message is NOT displayed at the

keypad and is not sent to SCS-VR.

9.28 Inactive User Code Audit

This option allows users to choose the number of days a user code can remain unused

before the panel sends an Inactive User Code message to the receiver.

The range is 0-365 days. The default is 0.

9.29 Weather Zip Code

This option allows local U.S.A. weather updates to display on the keypad. Enter the zip

code of the user at this option. When no number is entered weather conditions are not

displayed. Default is 0 (zero).

If using a 7800 Series keypad, the current weather conditions and the next day’s forecast

display as graphics on the Main Screen. All other DMP keypads display the weather

information in the Status List.

USE FALSE ALARM

QUESTION NO YES

ALLOW OWN USER

CODE CHG? NO YES

PANIC SUPRVISION:

NO YES

INACTIVE USER

AUDIT DAYS: 0

ENTER WEATHER

ZIP CODE: 0

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 77 78

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products XR550 Manuel d'instructions Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products XR550