Digital Monitoring Products XR550 Manuel d'instructions télécharger pdf (Page 66)

Digital Monitoring Products XR150/XR350/XR550 Series Programming Guide

APPENDIX

MAC Address

Short for Media Access Control address. This hardware address uniquely identies each network node. Not to

be confused with an IP address, which is assignable. In the Diagnostics function, the MAC address is the panel

on-board network hardware address. Press any top row Select key to display the panel MAC address. Press the

COMMAND key to view the next option.

Serial Number

This number is the network communicator serial number. Reference this number for communicator date-of-

manufacture, hardware version, etc. Press any top row Select key to display the Serial Number. Press the

COMMAND key to view the next option.

Loader Version

This display is for factory use only. Press any top row Select key to display the factory Loader Version. Press

the COMMAND key to view the next option.

Current Flash

This option displays Flash 1 or Flash 2 indicating which physical ash chip the panel is currently using. Press

any top row Select key to display the current ash information. Press the COMMAND key to view the next

option.

Communication Status

This option tests the individual components of cellular or network communication. The displayed results are

shown below.

Cellular Results:

Successful Display Failure Display

MODEM OPERATING NO MODEM FOUND

IDENTIFIED NO SIM CARD

TOWER DETECTED NO TOWER

REGISTERED NOT REGISTERED

This displays the cellular signal strength of the nearest tower for the SIM card carrier. The

▐

’s represent the signal strength 0-7. Select YES to continue through the remaining

component tests. Select NO to stop testing and return to the COMM STATUS option.

Successful Display Failure Display

CONNECTED

CONNECT ERROR

NOT ACTIVATED

COMM PATH GOOD NO ACK RECEIVED

Network Results:

Successful Display Failure Display

LINK OK LINK ERROR

DHCP OK DHCP ERROR

GATEWAY FOUND NO GATEWAY

DEST FOUND NO DESTINATION

COMM PATH GOOD NOT CONNECTED

NO ACK RECEIVED

Cellular Signal Strength (CELL SIGNAL)

This option provides a way to test the cellular signal strength of the nearest tower for

the SIM card carrier. Press any top row Select key to display cell signal strength. The X’s

represent the numerical value of the cell signal strength in -dBm. The ▐’s represent the

signal strength 0-7.

Cell Roaming Indicator (263C only)

The Cellular Signal Strength option in the panel’s Diagnostic menu contains a roaming

indicator. When the 263C Cellular Communicator is roaming or not in contact with a

Verizon owned tower, ROAM will be displayed on the top line of the keypad along with the

signal strength. To perform the cellular activation process from a keypad, the 263C MUST be in contact with

a Verizon owned tower. If the cellular communicator is in contact with a tower owned by another network,

ROAM and the signal strength displays, but activation cannot be completed. This feature can be used as a

diagnostic tool to troubleshoot activation issues.

SIGNAL: ▐▐▐▐▐▐▐

CONTINUE? NO YES

-XX dBm

SIGNAL:

▐▐▐▐▐▐▐

ROAM -XX dBm

SIGNAL:

▐▐▐▐▐▐▐

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 77 78

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products XR550 Manuel d'instructions Page 66

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products XR550