Digital Monitoring Products XR550 Manuel d'instructions télécharger pdf (Page 50)

Digital Monitoring Products XR150/XR350/XR550 Series Programming Guide

AREA INFORMATION

17.7 Any Bypass

When YES is selected, zones can be bypassed without a code number during the arming

sequence. A code number is always required to use the Bypass Zones option from the menu.

17.8 Area Schedules

Select YES to allow each area to follow individual sets of area schedules programmed in

the User Menu. Select NO for all areas to follow only one set of schedules in the User Menu.

See the panel User Guide to add schedules to the panel.

Note: Area Schedules are not designed to operate with All/Perimeter or

Home/Sleep/Away systems.

17.9 Early Morning Ambush (Network panels only)

Enter the number of minutes (1 to 15) before a silent alarm (Early Morning Ambush S33)

is sent to the central station using the area 1 account number. Enter 0 (zero) to disable

this option.

When a user code is entered to disarm area 1 at a keypad or reader with Access

Areas assigned to area 1, the same or different user code must be entered within the

programmed number of minutes to prevent an ambush message from being sent to the

receiver. The second user code also must have authority to disarm area 1.

In addition, a zone activation with Alarm Action Message C also cancels the Early Morning

Ambush timer and stops an Ambush message from being sent to the receiver. See Report to

Transmit section in Zone Information.

The keypad does not display any indication that the ambush timer is running.

Indications can be provided by assigning an output number to Entry Out and Ambush Out

in Output Options. Entry Out turns on one minute before the timer expires and turns off at

expiration. Ambush Out turns on at the timers’ expiration and turns off when Sensor reset

is performed.

17.10

Area Number

Enter the number of the area to program. After entering the area number, press COMMAND

to enter the area name. Only Area systems allow the area name to be changed.

Note: When All/Perimeter or Home/Sleep/Away is selected as the system type, the Area

Number does not display.

17.10.1

All/Perimeter Programming

When All/Perimeter is selected as the system type, program the Interior and Perimeter

areas as needed.

17.10.2

Home/Sleep/Away Programming

When Home/Sleep/Away is selected as the system type, program the Interior, Bedroom,

and Perimeter areas as needed.

17.11 Area Name

The area name can be up to 32 alphanumeric characters. To add an area name to the system,

press any Select key and then enter up to 32 characters for the new area name. Press COMMAND

to continue. For instructions on entering alphanumeric characters see section 1.7 Entering Alpha

Characters. Inactive areas are marked * UNUSED *. Only systems programmed for Area arming

have the option available to change the area name.

To mark an active area unused, press any top row Select key to delete the old name, then

press the COMMAND key. The programmer automatically programs the name as *UNUSED*.

If you have already cleared Area Information during Initialization, all areas are marked *

UNUSED *. See Initialization section.

Home/Sleep/Away with Guest systems display the area name, but the names cannot be

changed. The following are the display names that appear on the keypad:

Area Display Area Display Area Display

1 Perimeter 4 Guest1 Perimeter 7 Guest2 Perimeter

2 Interior 5 Guest1 Interior 8 Guest2 Interior

3 Bedrooms 6 Guest1 Bedrooms 9 Guest2 Bedrooms

17.12 Account Number

Enter the account number to be sent to the receiver for this area. Choose an account number

compatible with the Communication Type selected in Communications. The default Account

Number is the one previously entered in Communications. This account number is used when

sending area messages and events to the central station

See the Area Account Number

Messages in the Appendix.

ANY BYPS NO YES

AREA SCH NO YES

EARLY AMBUSH: 0

AREA NO: -

INT PERIM

INT BDRM PERIM

* UNUSED *

ACCOUNT NO: 12345

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 77 78

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products XR550 Manuel d'instructions Page 50

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products XR550