Digital Monitoring Products Canadian XR100 Guide d'installation télécharger pdf (Page 11)

Digital Monitoring Products XR100 Series Installation Guide

INTRODUCTION

XR100 Series Installation Guide Digital Monitoring Products

INTRODUCTION

2.5 Before you Begin

Before installing the XR100 Series, we recommend you read through the entire contents of this guide. Familiarize

yourself with the features of the panel and the key points to remember during the installation. Be sure to read and

understand all of the caution statements printed in bold italics.

2.6 About this Guide

The information in this guide is organized into ve sections: Table of Contents, Introduction, Installation,

Compliance, and System Diagrams.

• The Table of Contents at the front lists the headings and subheadings used throughout each section of the

guide. To the right of each heading is the section number where the information can be found.

• The Introduction section provides an overview of the various components that go into an XR100 Series system

and provides diagrams of typical system congurations. This section describes the panel, keypads, zone

expansion modules, and accessory modules and provides details on how they operate together in the system.

• The Installation section begins with mounting instructions for the enclosure and continues with detailed

XR100 Series panel operational characteristics.

• The Compliance section describes the various regulations the XR100 Series complies with, such as UL.

• The System Diagrams illustrate different ways to wire the XR100 Series to a variety of modules.

Caution Notes

Throughout this guide you will see caution notes containing information you need to know when installing the panel.

These cautions are indicated with a yield sign. Whenever you see a caution note, make sure you completely read

and understand its information. Failing to follow the caution note can cause damage to the equipment or improper

operation of one or more components in the system. See the example shown below.

Always ground the panel before applying power to any devices: The XR100 Series must be properly

grounded before connecting any devices or applying power to the panel. Proper grounding protects

against Electrostatic Discharge (ESD) that can damage system components.

2.7 How to Use this Guide

To locate information about the XR100 Series installation, rst go to the Table of Contents at the front of this guide.

Find the subject heading that best describes the information you need and turn to the section number shown to the

right of the heading.

The text that follows the heading is written to provide as much information about the subject as possible. If you

cannot nd the information you need under that heading, try scanning through a few of the headings before and

after and reading the text under those that sound similar.

System Components

3.1 Description

The DMP XR100 Series system is made up of an alarm panel with a built-in communicator, an enclosure, battery,

one 16.5 VAC transformer, and keypads. You can use up to sixteen supervised 32-character LCD keypads; network

communications; zone and output expansion modules; and initiating and indicating circuit modules. You can also

connect auxiliary devices to the panel’s output relays to expand the basic system control capability. Combined

current requirements of additional modules may require an auxiliary power supply. Refer to section 6.8 in this guide

when calculating power requirements.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products Canadian XR100 Guide d'installation Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products Canadian XR100