Digital Monitoring Products Canadian XR100 Guide d'installation télécharger pdf (Page 29)

Digital Monitoring Products XR100 Series Installation Guide

COMPLIANCE

XR100 Series Installation Guide Digital Monitoring Products

COMPLIANCE

Area Information

20.1 Ownership

The control unit system shall be under one ownership.

20.2 Annunciation

The System shall be installed so that when arming any area from any keypad, the local bell shall annunciate.

20.3 Trouble Display

The Status List programming shall be set to annunciate all trouble messages at all keypads. See the XR100 Series

Programming Guide (LT-0896).

20.4 Closing Wait

The Closing Wait option must be programmed YES. See the XR100 Series Programming Guide (LT-0896).

20.5 Local Bell Supervision

When a local bell is employed, the power supply for the bell shall be under 24-hour protection. Proper personnel for

maintenance or security of the system shall be able to disarm that area.

UL 1023 Specications

Household Burglar-Alarm System Units

21.1 Audible Devices

At least one listed audible device (Ademco AB12M) rated to operate over the voltage rate of 11.7 VDC to 12.8 VDC

and rated at 85 DB minimum must be used.

21.2 Auxiliary Circuits

At least one burglary alarm initiating device shall be used on the system. If the voltage for the device is applied

by the control unit the burglary alarm initiating device shall be rated to operate over the range of 11.5 VDC to

12.7 VDC.

21.3 Bell Cutoff

The Bell Cutoff time cannot be less than ve minutes. See the XR100 Series Programming Guide (LT-0896).

21.4 Entry Delay

The maximum entry delay used must not be more than 45 seconds. See the XR100 Series Programming Guide

(LT-0896).

21.5 Exit Delay

The maximum exit delay used must not be more than 60 seconds. See the XR100 Series Programming Guide

(LT-0896).

21.6 Weekly Test

The product should be tested weekly.

UL 1610 AND 1076 Specications

Central-Station and Proprietary Burglar-Alarm Units

22.1 Opening/Closing Reports

The Opening/Closing Reports option must be programmed as YES. See the XR100 Series Programming Guide

(LT-0896).

22.2 Closing Wait

The Closing Wait option must be programmed YES. See the XR100 Series Programming Guide (LT-0896).

22.3 Entry Delay

The maximum entry delay used must not be more than 60 seconds when using the Model 350A Grade A Attack

Resistant Housing. See the XR100 Series Programming Guide (LT-0896).

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Commentaires sur ces manuels

Pas de commentaire

Digital Monitoring Products Canadian XR100 Guide d'installation Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digital Monitoring Products Canadian XR100